110V A4 Size Hard Cover Case Maker Desktop Hardback Making Machine

Description

A4 Size Hard Cover Case Maker
Suitable for making hard cover books, CD and DVD boxes, ring binders, photo albums, restaurant menus…
In a short time, you can produce high-quality books in a wide variety of formats.
Cover, cardboard of the cover and cardboard of spine are located accurately; the thickness of cardboard can be 0.5-6 mm.
Voltage: 220V/110V(voltage changes according to country)
Max Cover size: 600x520mm(23.6''x20.4'')
The thickness of board: 0.5~6mm
Refraction And reflection mechanism: Yes
The function of negative pressure Absorption: Yes
Corner cutter: Yes
Edge folder: Yes
Temperature Range: 0-250 degree Celsius
Dimension W×D×H: 700x570x230mm/27.5*22.4*9inch
Net Weight: 42kg/93lb
Packing Weight: 60kg/132lb
Packge: Wooden Case
Item included:
1 set of hard cover making machine
Steps to creating a custom hard cover (case book):
Step 1: Insert your chipboard or card stock in the rotating arm of the machine and turn on the table light.
Step 2: Print your image on super-size tacking sheet (inkjet printable back Adhesive plastic sheet) which can be bought from local Sign supplies store). You can optionally laminate the sheet using an 8 micron laminate for protection. Peel off the pressure sensitive backing and lay the sheet face down on the machine table.
Step 3: Rotate the machine arm, which lowers the card stock onto the tacking sheet in the precise position. Trim the corners at 45 degrees and fold over the four edges.
Step 4: Run the cover through the laminator to cold pressure press out any paper bubbles or wrinkles. Your hard cover is now ready for binding!
Step 5: Place a hard cover fly-sheet on each side of your book block. Bind the book on a binding machine and then peel out the backing from the fly sheets. The inside chipboard is now covered. If you wish, you can pre-print on the inside of the cover fly-sheets to give your book that extra professional touch.
eBay Cross Border Trade powered by ChannelEffect